Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-CURRENT #2: Wed Sep 19 09:19:25 HST 2007
    root@mauibuilt.com:/usr/src/sys/i386/compile/MAUIBUILT
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (993.33-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536805376 (511 MB)
avail memory = 515788800 (491 MB)
ACPI APIC Table: <DELL   PE2500  >
Security auditing service present
BSM auditing present
ioapic0: Changing APIC ID to 2
ioapic1: Changing APIC ID to 3
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL PE2500> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 1ff00000 (3) failed
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xecc0-0xecff mem 0xfe223000-0xfe223fff,0xfe000000-0xfe0fffff irq 16 at device 4.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> PHY 1 on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:06:5b:04:1f:ff
fxp0: [ITHREAD]
atapci0: <Promise PDC20375 SATA150 controller> port 0xec80-0xecbf,0xec60-0xec6f,0xe880-0xe8ff mem 0xfe222000-0xfe222fff,0xfe200000-0xfe21ffff irq 29 at device 8.0 on pci0
atapci0: [ITHREAD]
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
re0: <RealTek 8169S Single-chip Gigabit Ethernet> port 0xe400-0xe4ff mem 0xfe224000-0xfe2240ff irq 30 at device 10.0 on pci0
miibus1: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> PHY 1 on miibus1
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
re0: Ethernet address: 00:40:f4:cd:ab:03
re0: [FILTER]
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xfd000000-0xfdffffff,0xfe221000-0xfe221fff at device 14.0 on pci0
isab0: <PCI-ISA bridge> port 0x8a0-0x8af at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8b0-0x8bf at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci1
ata1: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfe220000-0xfe220fff irq 5 at device 15.2 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <(0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
pcib1: <ACPI Host-PCI bridge> on acpi0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci1
pci2: <ACPI PCI bus> on pcib2
ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xdc00-0xdcff mem 0xfe9ff000-0xfe9fffff irq 26 at device 4.0 on pci2
ahc0: [ITHREAD]
aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfe9fe000-0xfe9fefff irq 28 at device 4.1 on pci2
ahc1: [ITHREAD]
aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
uhci0: <VIA 83C572 USB controller> port 0xcce0-0xccff irq 24 at device 14.0 on pci1
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb1: <VIA 83C572 USB controller> on uhci0
usb1: USB revision 1.0
uhub1: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xccc0-0xccdf irq 23 at device 14.1 on pci1
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb2: <VIA 83C572 USB controller> on uhci1
usb2: USB revision 1.0
uhub2: <VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xfeb00800-0xfeb008ff irq 22 at device 14.2 on pci1
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb3: EHCI version 1.0
usb3: companion controllers, 2 ports each: usb1 usb2
usb3: <VIA VT6202 USB 2.0 controller> on ehci0
usb3: USB revision 2.0
uhub3: <VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb3
uhub3: 4 ports with 4 removable, self powered
pci1: <serial bus, FireWire> at device 14.3 (no driver attached)
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
sio1: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: does not respond
device_attach: fdc0 attach returned 6
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcdfff,0xec000-0xeffff pnpid ORM0000 on isa0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ppc0: [GIANT-LOCKED]
ppc0: [ITHREAD]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 993330743 Hz quality 800
Timecounters tick every 1.000 msec
Waiting 5 seconds for SCSI devices to settle
acd0: CDROM <TEAC CD-ROM CD-224E/3.7D> at ata0-master UDMA33
ad4: 76324MB <WDC WD800JD-23LSA0 07.01D07> at ata2-master SATA150
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x02 ascq=0x00 
GEOM_LABEL: Label for provider acd0 is iso9660/FreeBSD_Install.
ses0 at ahc0 bus 0 target 6 lun 0
ses0: <DELL 1x6 U2W SCSI BP 1.29> Fixed Processor SCSI-2 device 
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at ahc0 bus 0 target 0 lun 0
da0: <FUJITSU MAJ3364MC 5509> Fixed Direct Access SCSI-3 device 
da0: 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
da0: Command Queueing Enabled
da0: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <FUJITSU MAJ3364MC 5509> Fixed Direct Access SCSI-3 device 
da1: 160.000MB/s transfers (80.000MHz DT, offset 127, 16bit)
da1: Command Queueing Enabled
da1: 34732MB (71132959 512 byte sectors: 255H 63S/T 4427C)
acd0: FAILURE - READ_BIG MEDIUM ERROR asc=0x02 ascq=0x00 
Trying to mount root from ufs:/dev/da0s1a
IP Filter: v4.1.23 initialized.  Default = pass all, Logging = enabled
re0: link state changed to UP
re0: promiscuous mode enabled
re0: promiscuous mode disabled
TCP: [89.149.197.240]:55628 to [205.166.10.50]:25 tcpflags 0x4<RST>; tcp_input: Listen socket: Spurious RST, segment rejected
TCP: [74.202.21.242]:24269 to [205.166.10.50]:25 tcpflags 0x4<RST>; tcp_input: Listen socket: Spurious RST, segment rejected
TCP: [189.155.192.244]:4026 to [205.166.10.50]:25 tcpflags 0x14<RST,ACK>; tcp_input: Listen socket: Our SYN|ACK was rejected, connection attempt aborted by remote endpoint